A-ES2 PIR Lights Stand Alone Type 220 VAC Mains (Upto 1000W Incandescent) (300W Fluorescent Max.) Motion sensor is a fully automatic indoor and outdoor security/courtesy light controller capable of controlling up to 1000W incandescent or 30W x 10 fluorescent of lighting. At night, the built in passive infrared (PIR) motion sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in photocell sensor saves electricity by deactivating the lights. An adjustable time lets you select how long the light stays on after activation. The LITE adjustment determine at what light level the lighting system will start operating when you set the motion sensor to automatic mode. SPECIFICATIONS Power Requirement : AC 220 ~ 240V / 50Hz Lighting Load : Max 1,000W Incandescent or Max 300 W Fluorescent Detection Angle : Up to 120° at 20° C Detection Distance : Min. 14M at 20° C Time Adjustment : From ( 10 ± 5) sec. to ( 4 ± 1) minutes Lux Adjustment : Approx. 0 ~ 1,000Lux Swiveling Angle : Horizontal 70° Vertical : 35° Mounting Height : Recommended at 1.8 ~ 2.0M (5.9 ~ 6.6 Ft) Wall Mount Wall Switch Control : On / Off Sensor Operation : Auto Operating Temperature : -20° C ~ +40° C Warm Up Time : About 1 min Protection Class : II Protection Degree : IP44 APPLICATION AREA: Car Park, Corridor, Dining Area, Individual Cabins, Large Cabins, Lift Lobby, Lifts, Living Room, Lobbies, Meeting Rooms, Pantry, Reception Areas, Rest Room, Small Offices, Stairways, Stores, Veranda.